| 清水混凝土模板特点 |
| 添加时间：2020/8/7 16:37:57 浏览次数： |
| 清水混凝土模板特点 Features of fair faced concrete formwork 1.清水混凝土工程是直接利用混凝土成型后的自然质感做为饰面效果的混凝土工程，混凝土表面质量的最终效果主要取决于清水混凝土模板的设计、加工、安装和节点细部处理。 1. Fair faced concrete engineering is a kind of concrete engineering that directly uses the natural texture after concrete forming as the finishing effect. The final effect of concrete surface quality mainly depends on the design, processing, installation and node detail treatment of fair faced concrete formwork. 2.模板表面特征：平整度、光洁度、拼缝、孔眼、线条、装饰图案及各种污染物均拓印到混凝土表面上。因此，清水混凝土模板更重视模板选型、模板分块、面板分割、对拉螺栓的排列和模板表面平整度。 2. Surface characteristics of formwork: flatness, finish, seam, hole, line, decorative pattern and various pollutants are rubbing on the concrete surface. Therefore, the fair faced concrete formwork pays more attention to the template selection, formwork block, panel segmentation, split bolt arrangement and formwork surface flatness. 施工特点 Construction features 模板安装时遵循先内侧、后外侧，先横墙、后纵墙，先角模后横模缝的原则。吊装时注意对面板的保护，保证明缝、禅缝的垂直度及交圈。模板配件紧固要用力均匀，保证相邻模板配件受力大小一致，避免模板产生不均变形。 The installation of formwork shall follow the principle of internal and external, transverse wall and longitudinal wall, angle formwork and transverse formwork joint. Pay attention to the protection of the panel during hoisting to ensure the perpendicularity and intersection of open and Zen joints. The formwork accessories shall be tightened evenly to ensure the stress of adjacent formwork accessories is consistent to avoid uneven deformation of formwork. |
| 上一页 机械缠绕玻璃钢化粪池 |
| 下一页 检查井盖模具适用范围 |