联系我们

名称:保定鑫鑫建材模具厂

电话:0312-8103011

手机:13403121185

地址:保定东郊工业园区

新闻动态
化粪池工艺流程
化粪池工艺流程
Septic tank process
化粪池是利用沉淀和厌氧发酵原理去除生活污水中悬浮性有机物的处理设备。高效波纹玻璃钢化粪器内部设有隔板,隔板上的孔上下错位,不易形成短流,并将整下罐体分成三部分;一级厌氧室、二级厌氧室和澄清室,一级、二级厌氧室底部相通,内部加有“MDS专用特型填料”。这样的分隔减少了污水与污泥的接触时间,使酸性发酵和碱性发酵两个过程互不干扰,同时填料的存在增加了污水污泥与厌氧菌的接触表面积,大大提高了反应效率。
Septic tank is processing equipment by precipitation and removal in wastewater anaerobic fermentation principle of suspended organic matter. High efficiency corrugated glass is provided with a partition inside dung, baffle holes on the upper and lower dislocation is not easy to form short flow, and the whole body is divided into three parts; a primary anaerobic chamber, two stage anaerobic chamber and a settling chamber, one stage and two stage anaerobic chamber communicated with the bottom, "MDS special type packing material and internal". This separation to reduce the contact time of the sewage and sludge, acid fermentation and fermentation process of alkaline two do not interfere with each other, and the filler is increased by the presence of sewage sludge and anaerobic contact area and the reaction efficiency was greatly enhanced.

联系方式

  1. 名称:保定鑫鑫建材模具厂
  2. 电话:0312-8103011
  3. 手机:13403121185
  4. 地址:保定东郊工业园区

版权 © 保定鑫鑫建材模具厂 网址:huafenchi.75ix.cn  推荐:化粪池模具,混凝土化粪池钢模具,水泥化粪池模具

网站建设及优化保定遨游网络公司